Choose Your System

Eccentric Stops, perfectly suited for infinite adjustment of elements by simply twisting them, with minimum space requirements.

‐ used where space is restricted

Eccentric Stops, perfectly suited for infinite adjustment of elements by simply twisting them, with minimum space requirements.

‐ for ground connection

Eccentric Stops, perfectly suited for infinite adjustment of elements by simply twisting them, with minimum space requirements.

‐ also serves as a support surface

Universal Stop 150 L, enables precise adjustment range of 0-100 mm for every element through the elongated hole.

Chromed version available for work on measuring tables, working with aluminum and for TIG-welding.

‐ Standard with fine scaling on both sides

Universal Stop 225 L, by combining elongated hole (0-100 mm adjustable range) and system boreholes, it can be firmly fastened or variably adjusted. In addition, it can be used with prisms and adapters.

Chromed version available for work on measuring tables, working with aluminum and for TIG-welding.

‐ combination of borehole and elongated hole
‐ Standard with fine scaling on both sides

Flat Square 175 can be firmly fixed or variably adjusted, resulting from the combination of system boreholes and elongated hole. The flat square is freely adjustable over a length of up to 100 mm.

Chromed version available for work on measuring tables, working with aluminum and for TIG-welding.

‐ combination of borehole and elongated hole

Universal Stop was especially designed for working with stops and positioning of large components. The combination of system boreholes and the elongated hole (0-200 mm range), enables fixed and versatile adjustment, for a multitude of clamping options.

Chromed version available for work on measuring tables, working with aluminum and for TIG-welding.

‐ combination of borehole and elongated hole

Stop and Clamping Square 175 L, can be utilized as a multifunctional adjustable angle, by combining system boreholes and elongated hole. A height-adjustable support can be created, by combining the Stop and Clamping Square 75 L (Item No. 280105.N) and the Stop and Clamping Square 175 SL (Item No. 280109.N). This component also functions well as a stop for large parts.

Chromed version available for work on measuring tables, working with aluminum and for TIG-welding.

‐ combination of borehole and elongated hole
‐ Standard with fine scaling on both sides

Stop- and Clamping Square 275 WL (Item No. 280115.N), can be utilized as a multifunctional adjustable angle, by combining system boreholes and elongated hole.
It can also be used as a stop, particularly for large parts.

‐ combination of borehole and elongated hole
‐ elongated hole 200 mm

Stop and Clamping Square, adjustable square for a multitude of applications, due to the combination of system boreholes and elongated hole. The additional head plate enables further combination options: In connection with other squares or as intake for tools like prisms or clamps.

‐ combination of borehole and elongated hole
‐ Standard with fine scaling on both sides

Stop and Clamping Squares 300 GK / 500 GK, facilitates a multitude of clamping options due to its three-dimensionality. It was especially designed for use with heavy components and can be used as a Stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square, opens up a multitude of clamping options, due to its three-dimensionality. It was specifically designed for heavy parts. It serves both as a stop as well as a table extension. In order to achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Squares 300 GK / 500 GK, facilitates a multitude of clamping options due to its three-dimensionality. It was especially designed for use with heavy components and can be used as a Stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square, opens up a multitude of clamping options, due to its three-dimensionality. It was specifically designed for heavy parts. It serves both as a stop as well as a table extension. In order to achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square, fixed and variably adjustable due to the combination of system boreholes and elongated hole. It can be used versatilely e.g. as table extension. This element is manufactured of high quality GGG40 ductile cast iron.
‐ stop on left

Stop and Clamping Square 300 G / 500 G / 750 G, can be fixed and variably adjusted due to the combination of system boreholes and the elongated hole. The versatile Square can also be used as table extension. This component is manufactured of high quality GGG40 ductile cast iron.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square 300 G / 500 G / 750 G, can be fixed and variably adjusted due to the combination of system boreholes and the elongated hole. The versatile Square can also be used as table extension. This component is manufactured of high quality GGG40 ductile cast iron.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square 300 G / 500 G / 750 G, can be fixed and variably adjusted due to the combination of system boreholes and the elongated hole. The versatile Square can also be used as table extension. This component is manufactured of high quality GGG40 ductile cast iron.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square 600 GK / 800 GK, enables a multitude of clamping options, due to its three-dimensionality. It was specifically designed for work with heavy parts, and can be used as a stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square 600 GK / 800 GK, enables a multitude of clamping options, due to its three-dimensionality. It was specifically designed for work with heavy parts, and can be used as a stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square 600 GK / 800 GK, enables a multitude of clamping options, due to its three-dimensionality. It was specifically designed for work with heavy parts, and can be used as a stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square 600 GK / 800 GK, enables a multitude of clamping options, due to its three-dimensionality. It was specifically designed for work with heavy parts, and can be used as a stop as well as a table extension. To achieve maximum stability, the Stop and Clamping Square is manufactured of GGG40 ductile cast iron. Ordering in pairs is recommended.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square 500 G, can be fixed and variably adjusted due to the combination of system boreholes and the elongated hole. The versatile Square can also be used as table extension. This component is manufactured of high quality GGG40 ductile cast iron.

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square 500 G, can be fixed and variably adjusted due to the combination of system boreholes and the elongated hole. The versatile Square can also be used as table extension. This component is manufactured of high quality GGG40 ductile cast iron.

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square GK aluminum-titanium, facilitates a multitude of clamping options, due to its three-dimensionality. It is especially designed for working with heavy parts, and can be used as a stop as well as a table extension. Stop and Clamping Squares are manufactured using an aluminum-titanium alloy, to reach maximum stability. Ordering in pairs is recommended.

Aluminum-Titanium: We use this lightweight and high-strength material for weight reasons for some large stop and clamping squares. However, the hardness of nitrided cast steel can not be achieved here.

Tighten the clamping elements with a maximum torque of 15 Nm

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square GK aluminum-titanium, facilitates a multitude of clamping options, due to its three-dimensionality. It is especially designed for working with heavy parts, and can be used as a stop as well as a table extension. Stop and Clamping Squares are manufactured using an aluminum-titanium alloy, to reach maximum stability. Ordering in pairs is recommended.

Aluminum-Titanium: We use this lightweight and high-strength material for weight reasons for some large stop and clamping squares. However, the hardness of nitrided cast steel can not be achieved here.

Tighten the clamping elements with a maximum torque of 15 Nm

‐ stop on right
‐ standard with fine scale

Stop and Clamping Square GK aluminum-titanium, facilitates a multitude of clamping options, due to its three-dimensionality. It is especially designed for working with heavy parts, and can be used as a stop as well as a table extension. Stop and Clamping Squares are manufactured using an aluminum-titanium alloy, to reach maximum stability. Ordering in pairs is recommended.

Aluminum-Titanium: We use this lightweight and high-strength material for weight reasons for some large stop and clamping squares. However, the hardness of nitrided cast steel can not be achieved here.

Tighten the clamping elements with a maximum torque of 15 Nm

‐ stop on left
‐ standard with fine scale

Stop and Clamping Square GK aluminum-titanium, facilitates a multitude of clamping options, due to its three-dimensionality. It is especially designed for working with heavy parts, and can be used as a stop as well as a table extension. Stop and Clamping Squares are manufactured using an aluminum-titanium alloy, to reach maximum stability. Ordering in pairs is recommended.

Aluminum-Titanium: We use this lightweight and high-strength material for weight reasons for some large stop and clamping squares. However, the hardness of nitrided cast steel can not be achieved here.

Tighten the clamping elements with a maximum torque of 15 Nm

‐ stop on right
‐ standard with fine scale

Standard Corner Connection, provides more workspace by giving the option to extend the table diagonally at a 45° angle. The Corner Connection can be securely fastened and works as a prism, stop or connecting piece. It is compatible with all other squares. The Corner Connection is extremely sturdy and provides connecting-, stop- and clamping options on 5 sides (Item No. 280191.N).

This component is manufactured of high quality GGG40 ductile cast iron.

Standard Corner Connection, provides more workspace by giving the option to extend the table diagonally at a 45° angle. The Corner Connection can be securely fastened and works as a prism, stop or connecting piece. It is compatible with all other squares. The Corner Connection is extremely sturdy and provides connecting-, stop- and clamping options on 5 sides (Item No. 280191.N).

This component is manufactured of high quality GGG40 ductile cast iron.

Universal Angle Hydromechanical Clamping, facilitates angular construction with high retention force, based on hydromechanical clamping. This square is infinitely variable within the range of 0° to 225°. The angle can be precisely set by using a digital angle meter, not included in delivery. The matching 14 mm hex wrench is available as Item No. 280854.

Square U-Shape 200×200 (sides 200 mm), ideally suited as a table extension, for vertical setups, as well as a sturdy connection between two welding tables. Riser Blocks are mounted to the table using connector bolts (Item No. 280560.N).

When used as a table extension exceeding 1000 mm, the Riser Block has to be supported by a table leg.

Combined with the legs (Item No. 280371), Riser Blocks can be flexibly used on the foundation rails.

A multitude of clamping- and combination options with other squares and stops are facilitated by the five-sided boreholes and the optional diagonal hole arrangement.

The 100×100 mm grid simplifies orientation.

‐ with diagonal grid

Square U-Shape 200×200 (sides 200 mm), ideally suited as a table extension, for vertical setups, as well as a sturdy connection between two welding tables. Riser Blocks are mounted to the table using connector bolts (Item No. 280560.N).

When used as a table extension exceeding 1000 mm, the Riser Block has to be supported by a table leg.

Combined with the legs (Item No. 280371), Riser Blocks can be flexibly used on the foundation rails.

A multitude of clamping- and combination options with other squares and stops are facilitated by the five-sided boreholes and the optional diagonal hole arrangement.

The 100×100 mm grid simplifies orientation.

From a length of 500 mm all U-shaped squares have mounting holes on the back to attach table legs (except 280310.P).

‐ with diagonal grid
‐ with footplates for track width 900

Square U-Shape 200×200 (sides 200 mm), ideally suited as a table extension, for vertical setups, as well as a sturdy connection between two welding tables. Riser Blocks are mounted to the table using connector bolts (Item No. 280560.N).

When used as a table extension exceeding 1000 mm, the Riser Block has to be supported by a table leg.

Combined with the legs (Item No. 280371), Riser Blocks can be flexibly used on the foundation rails.

A multitude of clamping- and combination options with other squares and stops are facilitated by the five-sided boreholes and the optional diagonal hole arrangement.

The 100×100 mm grid simplifies orientation.

From a length of 500 mm all U-shaped squares have mounting holes on the back to attach table legs (except 280310.P).

‐ with diagonal grid

Whether as table extension or as vertical clamping surface, aluminium profiles by Siegmund are versatile in their application.

Thanks to the light weight, you can also easily position and clamp large aluminum profiles by hand.

Due to the manufacturing process, residual chippings can remain in the profiles.
Comment:
Thanks to their properties, aluminum profiles are well suited as clamping tools, though depending on their usage they are subjects to wear.
Products made of aluminum are well suited for tacking your welding assemblies.
While welding we recommend to cover or, if possible, remove the aluminum profiles.
To assure a prolonged service life of your aluminum profiles, we recommend the use of an anti-spatter spray (e.g. Siegmund anti-spatter spray).
Occasionally adhered weld spatters can be removed by grinding.
Despite all precautions, it is possible that iron residues remain in the aluminum.
We recommend separating the production into work areas for rusting and non-rusting materials.

‐ Variable clamping also possible at an angle
‐ Clamping on up to 4 sides possible
‐ Requires Clamping Bolt without slot Double
‐ from 1000 mm support through table leg required (Reduction Bushing 000546 required)
‐ Flatness tolerance < 1,0 mm / 1000 mm

Whether as table extension or as vertical clamping surface, aluminium profiles by Siegmund are versatile in their application.

Thanks to the light weight, you can also easily position and clamp large aluminum profiles by hand.

Due to the manufacturing process, residual chippings can remain in the profiles.
Comment:
Thanks to their properties, aluminum profiles are well suited as clamping tools, though depending on their usage they are subjects to wear.
Products made of aluminum are well suited for tacking your welding assemblies.
While welding we recommend to cover or, if possible, remove the aluminum profiles.
To assure a prolonged service life of your aluminum profiles, we recommend the use of an anti-spatter spray (e.g. Siegmund anti-spatter spray).
Occasionally adhered weld spatters can be removed by grinding.
Despite all precautions, it is possible that iron residues remain in the aluminum.
We recommend separating the production into work areas for rusting and non-rusting materials.

‐ Variable clamping also possible at an angle
‐ Clamping on up to 4 sides possible
‐ Requires Clamping Bolt without slot Double
‐ from 1000 mm support through table leg required (Reduction Bushing 000546 required) ‐ Flatness tolerance < 1,0 mm / 1000 mm

Whether as table extension or as vertical clamping surface, aluminium profiles by Siegmund are versatile in their application.

Thanks to the light weight, you can also easily position and clamp large aluminum profiles by hand.

Due to the manufacturing process, residual chippings can remain in the profiles.
Comment:
Thanks to their properties, aluminum profiles are well suited as clamping tools, though depending on their usage they are subjects to wear.
Products made of aluminum are well suited for tacking your welding assemblies.
While welding we recommend to cover or, if possible, remove the aluminum profiles.
To assure a prolonged service life of your aluminum profiles, we recommend the use of an anti-spatter spray (e.g. Siegmund anti-spatter spray).
Occasionally adhered weld spatters can be removed by grinding.
Despite all precautions, it is possible that iron residues remain in the aluminum.
We recommend separating the production into work areas for rusting and non-rusting materials.

‐ Variable clamping also possible at an angle
‐ Clamping on up to 4 sides possible
‐ Requires Clamping Bolt without slot Double
‐ from 1000 mm support through table leg required (Reduction Bushing 000546 required) ‐ Flatness tolerance < 1,0 mm / 1000 mm

‐ for fastening the profiles on the front side
‐ insert into profile and clamp to table side
‐ for fixing: 2x 280511, 4x AP280528, 2x 800653.1.N (not included in the delivery) (not included in the delivery)

The adapter is required for the use of screw clamps in aluminum profiles. The lower material thickness of the aluminum profiles can be compensated by using the adapter.

‐ for Screw Clamps: 280610.N, 280630.N, 280615.N, 280611.1, 280611.2